Unguided Auger Boring Projects

In addition to Guided Auger Boring, A E Yates Trenchless Solutions Ltd can also provide Unguided Auger Boring for projects such as cross-county water and gas mains where line and level is not as critical as for gravity sewer projects. This technique involves installing steel casings up to 1200mm diameter, usually in 6 or 12m individual lengths onto which successive sections are added to form one continous installation.

The list below is a selection of some of the Unguided Auger Boring projects carried out by A E Yates Trenchless Solutions Ltd. These projects have made use of our 48" Blind Auger rig and you can found out more about the works done by this machine by looking at the case studies.

If you wish to discuss your requirements further please contact our Head Office


Blind auger boring rig working on site

Case Studies

Study Project Date  
Unguided Auger Boring at Crossley Street, Gorton. M246 08/01/2018
Unguided Auger Boring at Braden Trunk Main PSC Mains Renew, Irvine, Scotland. M238 07/11/2016
Unguided Auger Boring at Empingham to Hannington Water Pipeline. M130 31/07/2009
Unguided Auger Boring at Hawridge. DB120 28/02/2009

By using this site you are consenting to our use of cookies